G10/G20 Hand Hold Pick Hammer/Hand Hold Air Pick/Hand Hold Pneumatic Pick/Hand Hold Pneumtic Hammer

Max Pressure:0.49-0.63 Mpa Air Consumption:less than 60 L/S Impact Frequency:16Hz Impact Capacity:More than 50 J Reliability

Pneumatic Hand Hold Pick Hammer Detailed Product Description

INTRODUCTION AND USE OF PICK HAMMER

This product comes in many different sizes. Which one an individual chooses to use may depend on the job being performed. It can also vary based on the size and strength of the person performing the work.A pick hammer is a tool that is often used in excavating, geology or fossil-hunting. It somewhat resembles a construction hammer, except that it usually has a long, pointed tip on the end. It is designed to chisel through and break up rock in locations where using powered equipment might be impractical.A small pick hammer usually weighs around 13 ounces (.37 kg). It can be around 12 and 1/2 inches (31.75 cm) long. The head, or solid metal part, of the hammer is approximately 7 inches (17.78 cm) in length. This type is best suited for children to use when they are breaking hard rocks into smaller pieces.Medium-sized tools can weigh approximately 32 ounces (.9 kg). Even though this item is heavier than smaller varieties, it is typically has a shorter handle and head. The handle of a medium-sized pick hammer is normally 11 inches (27.94 cm) with a 7-inch (17.78 cm) head. This size is normally chosen for cracking into cracks or crevices. It can also be used to drive a chisel, which is a short rod with a cutting edge, into this material.

A large pick hammer can weigh as much as 64 ounces (1.81 kg). This tool is usually around 16 inches (40.64 cm) long, with a head that measures about 5 inches (12.57 cm). This size is mainly used whenever there are large areas of very hard rock that need to be broken up.The handle of a pick hammer is usually made of wood. It may be covered with a vinyl coating to help absorb the shock felt by a user when the tool strikes a hard surface. The head is normally made of steel. The pointed end of this section could be very sharp or might have a squared edge to it.People who need to break up heavy materials can often accomplish this by using a pick hammer. There is normally no special training needed in order to work with this piece of equipment. A common tool, it can usually be purchased at a local hardware store, for a fairly inexpensive price.Safety should be considered whenever people are using pick hammers. Goggles ought to be worn to protect the eyes from particles that break off when a person pounds the rock. Work boots with a steel toe inside them can keep the feet from being injured should a worker accidentally hit it with the sharp end of this tool.

APPLICATION OF AIR PICK

Pneumatic Small Air Pick  is used to 

break up the soft rock, concrete breaking solid ground and wall in the urban infrastructure construction project cutting and break the road on the road and pipeline construction. worked as impact machine in quarrying, mining and mechanical industries.

FETURE AND ADVANTAGE OF AIR PICK/PICK HAMMER/PNEUMATIC PICK

Well and High Quality Control ,Prompt Delivery ,Competitive Prices ,Small Order Acceptable ,OEM AcceptedSafe and easy operateHigh Efficiency and reliabilityGood Control from cutting force egding process to complete product.Minimal Maintennance

WORKING PRINCIPLE OF  AIR PICK/PICK HAMMER/PNEUMATIC PICK

G type pneumatic Working principle: compressed air-driven tools, by using compressed air distribution of tubular alternate allocating the purge valve in cylinder, make two sections of repeated impact hammer body doing exercise, impact picks, brazing tail into the rock or through the brazing picks in the split into pieces, cause.

Pneumatic pick is a tool that use compressed air as power,the compressed air come from air connection tube to the valve unit in the pick back head,through valve,allot the compress air to cylinder above below ant rum,promote hammer reciprocating up and down,hammer make punch beat the end of steel shank,ensure steel shank drill into concrete continuously,make it break into pieces.

SPECIFICATION OF  AIR PICK/PICK HAMMER/PNEUMATIC PICK

Model	Weight	Working pressure	Air comsumption	Max pressure
	kg	MPA	L/S	MPa
G10 Pick Hammer	10	0.4-0.63	≤20	0.63
G20 Pick Hammer	20	0.4-0.63	≤30	0.63

PRODUCT IN THE FACTORY

COMPONENT PICTURE 

PRODUCT PICTURE 

APPLICATION PICTUER

CERTIFICATE

G10/G20 Hand Hold Pick Hammer/Hand Hold Air Pick/Hand Hold Pneumatic Pick/Hand Hold Pneumtic Hammer